Every steel a working sharpener meets, rated two ways: how it behaves on the bench while you sharpen it, and how it performs in the customer's hand.

On the bench (left half)In use (right half)Farther out is always better.

Working draft. Use-side numbers are waiting on a line-by-line check against the Knife Steel Nerds rating tables.

Used for
Burr type

How to read the chart and where the numbers come from

Burr type follows Dr. Vadim Kraichuk's classification (Knife Grinders Australia). A positive burr is soft and bends instead of breaking, so it has to be honed off at a slightly raised angle. A negative burr is stiff and breaks away, so it can be honed off at the sharpening angle. Mixed steels sit in between.

No angle recommendations. Ratings describe the steel. The angle is the sharpener's call.